"Egoza" razor tape

"Egoza" barbed tape

Egoza razor tape is used in the production of the modern Egoza-Standard and Egoza-Caiman barbed wire, while it can be used as an independent means of fencing the territory, but it is not advisable to do so. The reason is simple – not reinforced razor tape has low strength and can break under a relatively small load, in addition, it is easy to cut with scissors for metal. The construction of the Egoza barbed tape is as follows – a stamped tape with rows of sharp razor spikes on both sides. The spikes of the tape are located so that they cling to any object and do not let it go, and the cutting edges have the ability to cause serious damage.

Egoza razor tape is made from galvanized steel coils according to the modern technical specifications TU U 25.9-21804553-002:2016 using automatic stamping equipment. The stamp design for the Egoza barbed tape was developed taking into account the fact that the spikes of the tape had the maximum sharpness of the razor edges and high strength, for which they are based on rounding with a radius of 2.5 mm. Galvanized steel EN 10346 0.5 mm thick with zinc coating 140-290 g/m² is used as a material for the manufacture of Egoza razor tape. The finished product has a width of 19 mm and a section for crimping the core with a width of 7.5 mm, which allows it to be reinforced with a wire with a diameter of 2.5 to 2.8 mm, which corresponds to the most popular types razor wire.